How to Set Up & Repair Videos Below By Topic With Related Products Listed Below That You Can Add To Your Cart To Save Time!
How To Assemble An Sun Garden KD Frame Umbrella
BASE SETUP VIDEO | BASE REPAIR VIDEO
SHOP BASE PRODUCTS SEEN IN THIS VIDEO BELOW
The Base Cone screws into the base. The opening at the top is where the Reducer Socket is installed (long tabs up), then the umbrella itself is inseeted. This part is available in Grey, Bronze, or Black.
White parts have been discontinued and the White Base Cone is no longer available!
HOW TO REPLACE DOCUMENT: CLICK HERE
Our free-standing bases are only available in Grey, Bronze, or Black. When you purchase a Complete Base, you will receive:
1 Union Nut (H1)
1 Reducer Socket (H2)
1 Assembly Fixing Tube (H3)
1 Base Cone (H4)
1 Base Cover (H5)
1 Tray Base (H6)
For any parts clarification, please see the diagram or contact us!
When you receive your base, you must empty the ENTIRE BOX! The Base Cone is on one end of the box!
White parts have been discontinued and stock is limited!
The Union Nut is one of the components of the free-standing base. It works in conjunction with the Reducer Socket to ensure your umbrella does not rotate freely in the base. The Union Nut is available in White, Grey, Bronze, Black.
*White parts have been discontinued and stock is limited.
The Tray Base is the bottom part of the base which is filled with either 250 pounds of sand or pea gravel. You can purchase the sand or pea gravel Home Depot or Lowes. The tray base holds roughly 5.5 bags.
* In the event you would like to move your umbrella or store it for the winter, pea gravel is much easier to remove. Also, if you live in an area that sees freezing temperatures, dont add water to the sand or stones, there is a chance the water inside can freeze and crack the base. NOTE: you cannot use water only it’s not enough weight.
The Base Cover is used over the Tray Base (where the stones go) and is available in White, Grey, Bronze, or Black.
*White parts have been discontinued and stock is limited.
The Sun Stand is a mounted base for the Easy Sun Parasol which can be mounted either on a deck or in concrete to save space on your property!
The Sun Stand will come with the components listed below.
(1) Union Nut
(1) Reducer Socket
(1) Base Cone
(1) Spacer
(1) Floor Plate
(1) Hardware
HOW TO SET UP DOCUMENT: CLICK HERE
We do not offer this in Sunkist Bronze
The Reducer Socket works in conjunction with the Union Nut to keep your umbrella from rotating freely in the base. When installing, make sure the long teeth face up!
*This part is universal on all current models of the Easy Sun Parasol, but will not work on the Jr. Octagon which has been discontinued for several years. If any assistance is needed, please contact our Consumer Division at info@sungarden.us to confirm your model.
HOW TO REPLACE Umbrella CANOPY
SHOP CANOPY PRODUCTS SEEN IN THIS VIDEO BELOW
Orginal Canopy Design and the New TM design canopy vidoes below
NEW DESIGN VIDEO WITH SECURE STRAP
How To Install A Sun Cape
SHOP SUN CAPE PRODUCTS SEEN IN THIS VIDEO BELOW
The white polypropylene cover slips over the closed and secured umbrella to help protect it and has a drawstring closure. This cover is meant for use when storing your umbrella!
Please secure the rib assembly to the pole with the canopy strap prior to putting on the cover.
Fits all current models of the Easy Sun Parasol!
*PLEASE NOTE THAT PE STORAGE COVERS, SUN CAPE DAILY COVERS, AND CANOPY STRAPS ARE ALL SOLD SEPARATELY*
The canopy strap is used to secure the rib assembly to the pole when the umbrella is not in use and is only available grey. Securing the rib assembly will help prevent any wind damage and if you would like more information regarding wind damages and how to avoid them, please contact our Consumer Division at info@sungarden.us.
How To Replace Swivel Button
SHOP SWIVEL BUTTON SEEN IN THIS VIDEO BELOW
Depending on model you will need either a 15mm or 14mm open end wrench to unscrew button
The Swivel Button works with the Swivel Mechanism to allow 360 degree rotation and is located near the base. Now American Made!
How To Replace Winding Cable
SHOP PARTS SEEN IN THIS VIDEO BELOW or Request Technical Support
SHOP WINDING CABLE PARTS BELOW
The White Winding Cable 16.5’ long and is specifically design to handle the forces. It is used internally to open and close the canopy. If you have any questions, please contact the Consumer Division at info@sungarden.us! The cord is 880lb test and you wil NOT find anything this strong a any hardwarestore.
The Black Winding Cable is an US exclusive. 20% stronger and coated to allow the cord to glide thru the umbrella smoothly. This cord is 1,200lb test and smae as above ou wil NOT find anything this strong a any hardware store..
The Winding Cables will come with three replacement rivets.
*When your umbrella is fully open adn the canopy sways in the breeze, the Brake Block and Lining needs to be replaced and the link for this part is below!
HOW TO REPLACE DOCUMENT: CLICK HERE
Ed McDonald, Director of Technical Services will call to help walk you through the replacement of a winding cable or how to install parts. Prior to the call you will recieve install instructions, material needed and tools required. After selecting the service it is recommended you email us several pictures of the umbrella plus any broken parts to INFO@SUNGARDEN.US. Include a date and 3 hour time range. We are closed on Sundays plus located in the EST time zone.
The Articulated Joint Elbow is used to attach the Ball Joint and Rib Assembly (aka Spoke Stand) to the Sliding Pole. This part is available in White, Grey, Bronze, or Black.
*White parts have been discontinued and stock is limited.
The Drum & Axle is located inside the Winch Housing and internally assists in opening the canopy. This part is only available in White and replacement instructions can be provided if needed.
*THIS PART WORKS ON THE 11.5 FOOT SR. OCTAGON, 13 FOOT CURVE, & 9X12 OVAL MODELS OF THE EASY SUN PARASOL.*
This Ball Joint is made for the 11.5T Sr. Octagon, the 13 foot Curve, and the 9 x 12 Oval models of the Easy Sun Parasol. It attaches to the Articulated Elbow Joint and connects to the Rib Assembly and includes 1 Brake Block and Lining and 1 Brake Lever. This part is available in White, Grey, Bronze, or Beige.* If you need instructions or if your Ball Joint does not come with them, please contact us!
*White parts have been discontinued and stock is limited.
HOW TO REPLACE DOCUMENT: CLICK HERE
How To Replace Canopy Arms
SHOP CANOPY ARM PARTS BELOW
This Center Hub (also called the Bottom Hub) is where the ribs connect. This part is available in White, Grey, Bronze, or Black.
*White parts have been discontinued and stock is limited.
This Rib Pin is used to connect the ribs to the Top or Bottom Hub and are sold in a set of 8.
The Center Hub (also called the Top Hub) comes with 4 Glide Tube Screws, 8 Connecting Screws, and is located where the ribs connect at the top. This part is available in White, Grey, Bronze, or Black.
*White parts have been discontinued and stock is limited.
This rib was made for the 11.5 foot Sr. Octagon model of the Easy Sun Parasol which has a measurement of roughly 66 inches EXCLUDING the end pieces. This rib is available in White, Grey, Bronze or Beige*.
*Beige and White parts have been discontinued and stock is limited.
How To Assemble & Rotate Standing Pole
PURCHASE REPLACEMENT PARTS BELOW
The Handle w/Grub Screw is used to open the canopy and is attached to the Winch Housing with the Grub Screw. If you need instructions for installing the Handle, please contact our Consumer Division at info@sungarden.us!
Please keep in mind the Handle is shipped as one piece and the black plastic part is not available separately.
The Grub Screw is used to attach the Handle to the Winch Housing. If you need instructions for installing the Handle, please contact our Consumer Division at info@sungarden.us!
The KD Swivel Mechanism is for use on the KD frame made from 2015 to 2023. The mechanism is inserted into the bottom of the standing pole. This allows the umbrella to rotate 360 degrees and works in conjunction with the Swivel Button to keep the umbrella in place. The KD Swivel Mechanism is available in White, Silver, Bronze, or Black.
*White parts have been discontinued and stock is limited.
How To REPLACE SLIDER
PURCHASE REPLACEMENT PARTS BELOW
The Slider is used in conjunction with the Block to allow a stable and steady extension of the canopy. This part is available in White, Grey, Bronze, or Black.
*White parts have been discontinued and stock is limited.